Добро пожаловать в клуб

Показать / Спрятать  Домой  Новости Статьи Файлы Форум Web ссылки F.A.Q. Логобург    Показать / Спрятать

       
Поиск   
Главное меню
ДомойНовостиСтатьиДефектологияПостановка звуковФайлыКнижный мирФорумСловарьРассылкаКаталог ссылокРейтинг пользователейЧаВо(FAQ)КонкурсWeb магазинШкольникамКарта сайта

Поздравляем!
Поздравляем нового Логобуржца feia2727 со вступлением в клуб!

Реклама

КНИЖНЫЙ МИР

Design process of cementless femoral stem   Mohd Yusof Baharuddin,Sh-Hussain Salleh and Alias Mohd Noor

Design process of cementless femoral stem

68 страниц. 2014 год.
LAP Lambert Academic Publishing
Asian hip morphology differs from western populations due to their lifestyle and physical stature. This was confirmed by the modification of commercial hip implants to address these differences and to improve the primary fixation stability inside the femoral canal. The process began with a three dimensional (3D) of morphology study, followed by a femoral stem design, fit and fill analysis, and nonlinear finite element analysis (FEA). The 3D morphology study provided accurate dimensions that ensured primary fixation stability for the stem – bone interface and prevented stress shielding at the calcar region. The results showed better total fit (53.7%) and fill (76.7%) in the canal for this newly designed metaphyseal loading with mediolateral flared femoral stem. The FEA showed the maximum equivalent von Misses stress was 66.88 MPa proximally with a safety factor of 2.39 against endosteal fracture, and micromotion was 4.73 µm, which promotes osseointegration. The prototype was...
 
- Генерация страницы: 0.04 секунд -